To ensure proper hygiene, extend the lifespan of the device, and provide an optimal experience for all users, Meta Quest headsets should be cleaned and disinfected after each use or whenever visible dirt is detected.

Headset Cleaning and Disinfection

1. Turn off the device completely before performing any cleaning tasks.
2. Use a clean microfiber cloth or a soft disposable wipe lightly moistened with an alcohol-based disinfectant suitable for electronic devices. Never spray the product directly onto the headset.
3. Gently clean the external surfaces of the headset, including the housing, controllers, and all areas that come into contact with the user's skin.
4. Allow the device to dry completely before using or storing it.

Lens Cleaning

The lenses require special care due to their sensitivity:

• Use only a clean, dry microfiber cloth.
• Clean using gentle circular motions to remove fingerprints or dust.
• Do not apply liquids, alcohol, chemical products, or disinfectant wipes directly to the lenses, as this may damage the optical coatings and affect image quality.

Straps and Facial Interfaces

Straps, facial interfaces, and other accessories that come into direct contact with the skin should be cleaned according to the manufacturer's recommendations. In general:

• Remove detachable accessories whenever possible.
• Clean surfaces with a slightly damp cloth and allow them to dry completely before reassembly.
• Replace components that show significant wear, cracks, or deterioration.

Additional Recommendations

• Do not use abrasive products, solvents, bleach, or harsh household cleaners.
• Prevent liquids from entering charging ports, speakers, sensors, or electronic compartments.
• Store the headset in a clean, dry location away from direct sunlight.
• Keep the lenses away from direct sunlight, as they can act like a magnifying glass and permanently damage the internal display.
• Perform periodic inspections to verify the condition of straps, facial interfaces, controllers, and charging cables.

Important: Never spray cleaning products directly onto the headset or lenses. Always apply cleaning products to a suitable cloth first to avoid damage to electronic and optical components.